Aung Metals, a prominent manufacturer and supplier located in Naypyidaw, Myanmar, is all about crafting top-notch C35 Round Bars that are built for strength, durability, and precision. With state-of-the-art manufacturing facilities and a rigorous quality control process, Aung Metals guarantees that its products not only meet international standards but also deliver reliable performance across a range of industrial applications. C35 Round Bars are made from medium-carbon steel, celebrated for their impressive hardness, tensile strength, and wear resistance. Thanks to the company’s unwavering commitment to quality and reliability, these bars are perfect for industries like automotive, machinery, construction, and general engineering, ensuring they perform well even in tough environments.
C35 Round Bars consist of medium-carbon steel with about 0.32–0.40% carbon, 0.50–0.80% manganese, along with trace amounts of phosphorus and sulfur. This blend creates a well-rounded mix of strength, hardness, and toughness. On the mechanical side, C35 steel boasts a tensile strength of roughly 600–700 MPa and a yield strength of around 350–400 MPa. It’s known for good machinability, moderate ductility, and excellent wear resistance, making it a great candidate for heat treatment to boost hardness and strength for demanding uses.
|
Variant |
Cast |
Di |
Weldability |
C % |
Si % |
Mn % |
P % |
S % |
Cr % |
Ni % |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
C35E |
CC |
0.98 |
CEV 0.65max |
Min |
0.35 |
0.15 |
0.50 |
– |
0.015 |
– |
– |
|
Pcm 0.49max |
Max |
0.39 |
0.35 |
0.80 |
0.030 |
0.035 |
0.30 |
0.30 |
| Variant | Condition | Format | Dimension [mm] | Yield strength min [MPa] | Tensile strength [MPa] | Elongation A5[%] | Hardness | Impact (ISO-V) strengthmin |
|---|---|---|---|---|---|---|---|---|
| Rp0.2 * Reh, ** Rel | ||||||||
| C35E | +AR | Round bar | < 20 | 345* | 520-690 | 10 | < 230 HB | 0 °C 0 J (long) 0 |
| EN | C35 (1.0501) |
| DIN | C35, CM35 |
| BS | 970 070M36 |
| UNI | C35 |
| JIS | S35C |
Considerations for installing C35 Round Bar include ensuring proper alignment, adequate support, correct machining, and adherence to safety and load-bearing requirements.
Yes, C35 Round Bar can be welded, but it requires proper preheating and post-weld heat treatment to avoid brittleness. Using appropriate welding electrodes is also essential for achieving strong, durable welds.
C35 Round Bar is available in various sizes, typically ranging from 10 mm to 250 mm in diameter, with custom sizes available upon request.
These C35 Round Bars find their way into various sectors, including automotive, mechanical, and general engineering, where they’re used to manufacture components that need to be strong and wear-resistant. You’ll often see them in applications like shafts, bolts, studs, pins, axles, crankshafts, and various machinery parts. They’re also utilized in agricultural equipment, construction machinery, and forging operations where toughness and dimensional stability are essential. Thanks to their responsiveness to heat treatment and machining, C35 Round Bars are perfect for creating precision-engineered components that deliver long-lasting performance under high stress and operational loads.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Aung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Naypyidaw, Myanmar
Copyright 2024 Aung Metals. All rights reserved
